Home

Roof Ladder Articles

Roof Ladders: Why Do You Need Them?

Posted on Sep 10, 2011
Author: Matt Browne

With a couple of footballs, an aerobie and a soggy looking teddy bear on the roof, it's about time you got up there and sorted things out. While you're on the roof you can fix the wonky tiles and mend any little holes that could become big leaks in the not too distant.

Don't wait any longer, make your way up to the roof and use a hired roof ladder to keep you safe. Although the Working at Height Regulations were created in 2005 for the construction industry, they provide us DIYers with oodles of common sense for our own projects. Don't scramble to the roof without thinking carefully about your safety; hire a roof ladder and a scaffold tower to give yourself safe, solid platforms from which to work.

So, how do you use a roof ladder?

Most hired roof ladders are lightweight and designed specifically to access your roof. They have wheels on one side, load-bearing bars to keep roof damage to a minimum and a large hook at one end that clasps the roof ridge.

To position your hired roof ladder safely, standing from the safety of a scaffold tower, roll the roof ladder out over the roof with the wheel-side down. With the hook safely over the ridge, roll the ladder over until the hook is facing down over the ridge. To be absolutely certain that the ladder is in position make sure you can't see the hook.

Scaffold Tower Access

Most roof ladders are so light that you can put them into position using just one hand, but hiring a scaffold tower will provide you with a safe, stable platform from which to position that ladder. While hired roof ladders have load-bearing bars in place so you don't damage your roof and to provide a little extra grip, and the rungs always have a high-grip design to provide the maximum in safety. However, having a scaffold tower under the eaves is the best way to ensure your safety at height.

Stay Safe

Of course, if you're galumphing around on the roof you need to be extremely careful. Good-quality roof ladders don't make you infallible, it doesn't matter how aware, even the slightest of slips can wind up as a dreadful accident, or worse. Hiring a scaffold tower gives you the peace of mind that if you do happen to slide, you will only go as far as the gutters - leaving you with a story, rather than a new way of life. To avoid damaging the roof, it is wise to wear sneakers or sports shoes, instead of heavy work boots, which have a big sole and. They are also better for you to feel the roof and remain safe.

Although it is generally recommended that strolling around on the rooftile is best avoided, there are times like this when you have no choice.

Walking the Walk

When you are actually walking on the roof away from your hired roof ladder always walk along the bottom three inches of the tiles, where they overlap with those below - so where they are stronger - and are hung onto the tile batons (the bits of wood that are attached to the roof).

Walk parallel to the ridge, distributing your weight evenly and as softly as possible. When you reach the area you need to work on take a large cut of foam, ideally from an old sofa, which you can use as your base. With a base you will distribute weight across a larger area, minimising the risk of cracked tiles. The rigid foam will grip the roof, lowering your chance of slippage.

With your safety in mind get in touch with a contract hire business that will provide you with the perfect roof ladder and scaffold tower combination, so you can get your roof looking spic-and-span again.

Article Source: http://www.articlesbase.com/business-articles/roof-ladders-why-do-you-need-them-3755838.html

About the Author
Matt Browne, managing director of www.Lakeside-Hire.co.uk, draws on his 20 years' experience in the construction industry to share his knowledge of working at height solutions. His aim is to help you work safely especially when you're using a scaffold tower. Get in touch to see how he - and Lakeside-Hire - can help you.

How to Ensure Safety With Use of Aluminium Step Ladder

Posted on Apr 08, 2011
Author: Andrew Hudson

The ladder manufacturers play a crucial role in the production of ladders which constitute highly essential tools for management of the household activities. Ladders made of aluminium from branded Ladder Manufacturers can be relied greatly for doing up different house hold activities like repairing the roof, cleaning the gutters, changing or hanging the light bulbs & hanging wall paintings etc. Therefore aluminium step ladder is widely used these days to reach at desirable height above ground & do the necessary nitty gritty without any hassle.

The ladder manufacturers focus on the supply & retailing of aluminium step ladder that will help the user maintain the balance properly. That's why they made it from robust material of aluminium that gives them extra strength & capacity to bear more weight. But there is always the risk of falling down from an aluminium step ladder unless proper care is taken at the time of climbing.

However one can avoid accidents & ensure safety with the use of aluminium step ladder by strictly following the guidelines given below.

 

  • With the efforts of OSHA (Occupational Safety & Health Administration), certain ladder safety rules have come into effect that must be satisfied by an aluminium step ladder prior to its use. Medium duty, heavy duty & light duty ladder work are three different ratings that have been set for ladders meant to lift different weight loads on them. An aluminium ladder made for heavy duty purpose is supposed to withstand 250 lbs, a light duty ladder up at 200 lbs & a medium duty ladder up to 225 labs weight. So an aluminium step ladder can be best chosen on the basis of the highest load it can support at the time of climbing along with the weight of the climber.
  • For every four feet extension during leaning, the foot of the Aluminium Step Ladder should be kept at least one foot away from the wall it leaned against.
  • The stability of an aluminium ladder depends largely on how secured the top of it is remains at the point of landing. Therefore a roof ladder with safety handgrips or special hooks can be used at the top end for better security. In this way, maximum cases of ladder fallings which mainly occur due to sliding of sideways or objects it is propped against can be avoided successfully.
  • Standing on any 3 steps of an aluminium step ladder always turns out to be unsafe. That's why it is advised to avoid it completely & if it is very urgent then think of holding on to something firm for full support at the given height.
  • Since electricity can pass through aluminium ladders, it would be wise to keep them away from means such as electricity wires & power lines that can give rise to severe jolts due to live electricity produced in them.

http://www.emiratesmetal.com/index.htm

Article Source: http://www.articlesbase.com/customer-service-articles/how-to-ensure-safety-with-use-of-aluminium-step-ladder-2995940.html

About the Author

We are the company known for Ladder Manufacturers, producing branded products such asAluminium Step Ladder, Industrial Ladder, Industrial Ladder, Telescopic Ladder and others.

Types of ladders

Posted on Feb 23, 2011
Author: rickey

Most Rigid ladders may be portable. They can be removed after use and stored. They are made of light weight material. loft ladders Some ladders are permanently fixed to a building or a vessel. Rigid ladders are made of timber, fiberglass, metal tubes or tough plastics.  There many types of rigid ladders including bridge, cat, extension, fixed, folding, hook, orchard, platform, roof, step, turntable and vertically rising.

A bridge ladder is used to pass over a narrow depression. It is placed in a horizontal position over the depression to enable people to pass over it. Cat ladder is used to work on a roof. Workers lay it on top of the roof to prevent sliding. Extension ladder is sometimes referred to as telescopic ladder. It is a form of composite ladder consisting of several ladders fixed together. The length of the ladder can be varied by moving the units over each other. When folded an extension ladder is convenient for storage. In us it can be extended to scale high heights. Some extension ladders have a pulley system which makes it possible to operate the extension on the ground.  The units are locked together using dogs and pawls.

A fixed ladder consists of two ladders permanently connected at the top to form a triangular shape. A folding ladder consists of a series of ladders connected by hinges which enable them to be folded for storage.

Hook ladder sometimes referred to as pompier ladder. It has hooks on top. The hooks are used to secure the top to a windowsill on the upper floors. The ladder is used by fire fighters for scaling buildings to higher floors. Orchard ladder is used for fruit picking. It has 3 legs. The third leg is inserted between tree branches while picking fruits on higher branches. Step ladder has a hinge in the middle. It is used when folded to from an inverted V. The two halves are fixed at an angle using stays. Platform ladder is basically a step ladder but with a horizontal platform at the top.  It is notable that a step ladder is able to support itself and does not have to be leaned on the wall.

Roof ladder is a form of hook ladder adapted for the roof. The hook is used to grip the ridge of a pitched roof. Turntable ladder is a form of extension ladder used by fire fighters. It is fixed to a rotating platform on top a fire engine truck. Vertically rising ladder is used for climbing high points. It is used to suspend the user while performing the job.

Aluminum tubes are the popular material for making ladders.  Aluminum ladders are light and easy to carry. Fiberglass Ladders are used where electrical wires are close by because fibreglass is not a good conductor of electricity. Timber conducts electricity when wet and should be used in such situations. Assault ladders are used during wars. Soldiers used them to climb onto enemy vessels or buildings.

Article Source: http://www.articlesbase.com/business-articles/types-of-ladders-3676062.html

About the Author

For more details just visit our website aluminum ladders

Essential Basic Height Safety Equipmen

Posted on Feb 12, 2011
Author: Edward Given

Essential Basic Height Safety Equipment

Among the basic yet essential height safety equipment are fixed permanent ladders, roof hand rail, fall arrestors and lanyards. These are necessary for working at heights and ensure that the worker can get the job done while staying completely safe.


Fixed Permanent Ladders

It is obvious that to reach the higher levels of buildings like the roof, ladders are needed. These are common and convenient utilities which are not difficult to handle at all. But having fixed permanent ladders are better. As their name goes, these ladders are fixed permanently onto the building or other structure to provide vertical access. Installation of this type of equipment makes maintenance and repair for rooftops and other high building areas easier. Since the equipment is fixed, it becomes steady and descending from the ladder is not difficult. These ladders have varied designs too and for those intended for higher heights, a ladder with a safety cage at the top would be ideal.


Roof Hand Rail

Hand rail systems are necessary not only due to government regulations but of course, for the safety of workers. Handrails can be installed for ladders but it is more common for a roof hand rail to be installed on a buildings. A roof hand rail and all other kinds of hand rails for that matter, provides a safety bar for gripping while on a high area.


Fall Arrestors

Fall arrestors are fall protection equipment. This safety equipment is utilised to stop a disabling or fatal fall when a person is working on an elevated area. Among all the basic height equipments this is the most necessary as falls are always catastrophic and those working at heights are really vulnerable of this type of accident. This type of safety equipment is required by the government to be used at all times when working at heights. If you work at heights, ensure you have these handy and installed properly for your own benefit and for the benefit of your fellow workers. Safety just cannot be stressed enough.


Lanyards

Lanyards are primarily durable and flexible cords, wires or ropes worn on the body to hold an object and keep it in sight. In working at heights, tools need be brought and held since they are needed at the site of repair or maintenance. Workers wear lanyards to ensure that if in instances they lose their grip on their tools that it won't fall onto their co-workers below, especially on the head. Lanyards come with different string designs for small, medium and large tools. Some can be worn on the neck but more are intended to be for the wrist.


Article Source: http://www.articlesbase.com/information-technology-articles/essential-basic-height-safety-equipmen-4799035.html

About the Author

Visit www.safeatheights.com.au for more information about Safe @ Heights. Visit www.safeatheights.com.au for more information about Safe @ Heights.

Tips for Using Ladders and Working at Height

Posted on Jan 18, 2011
Author: Richard N. Williams

Working at height is responsible for hundreds of work related accidents each year and falls from heights result in hundreds of serious injuries and even death and yet many of these height and ladder related accidents can be prevented.

When working at height the most important thing to do before carrying out any work is to perform a risk assessment. This does not necessarily mean excessive paper work but it is a good idea to make a note of a few of the potential risks you may face. When working with heights these can be obvious such as falls and injury but it also good no note how are you are and the likelihood of serious or life threatening injury:

* Its important when ever working at a height that can lead to serious injury or death in a fall that you never work alone and have at least one person on site in case of accidents.

When you have identified the risks its important to analyse the job in hand as the type of task can often reflect in the equipment needed, including the type of ladders to use.

When working inside a building the best ladders to use are step-ladders or combination ladders. These are ideal for most jobs inside and as the can both be folded away and they have a platform for resting tools on which will prevent the need for climbing the ladder whilst carrying equipment.

Work platforms are also useful when working on ceilings and though they are more cumbersome some folding work platforms are available.

Work Platform

Work Platform

Extendable or extension ladders are good for working outdoors and are rested against a wall. These ladders are however, the most dangerous type of ladder as they can slip and topple and as they can extend they are also very high. When using an extendable ladder its vital that you rest it the correct angle on a non-slip floor. Getting someone to foot it for you is also a good idea.

Often when working at the top of walls or on roofs its better to use a roof ladder. These ladders extend down and can also allow you to rest against a roof without fear of falling through.

Article Source: http://www.articlesbase.com/project-management-articles/tips-for-using-ladders-and-working-at-height-1721764.html

About the Author

Richard N Williams is interested in ladders, extension ladders and step ladders. Please visit us website if you are interested in extension ladders or other types of ladders.

Ladder Injuries, Accidental Fall Statistics Among Reasons Not to Try DIY Roofing

Posted on Dec 17, 2010
Author: Daniel J Harris

When Popular Mechanics' "expert DIY guy" lists roofing as one of the top five "don't do-it-yourself projects," it's worth noting. And when "Ask the Builder's" nationally syndicated newspaper columnist (and DIY enthusiast) Tim Carter joins suit in talking homeowners down from the roof, it's time to put away the ladder and pick up the phone.

 

Relying on a reputable, professional roofing company to install your new roof or just tackle your roof repairs is the best decision to save you time, hassle and the potential added expense if DIY repairs result in leaks. Most importantly, leaving roofing jobs to the pros saves you the very real risk of serious injuries, and even death.

 

Ladder Injuries

According to the U.S. Consumer Products Safety Commission, about 165,000 Americans require medical treatment for ladder-related injuries each year. Based on a 1990-2005 study published in the American Journal of Preventive Medicine, that number is escalating. During the course of the study, from beginning to end, the number of reported cases in which Americans were hurt in incidents involving ladders climbed by more than 50 percent.

 

Other ladder-injury findings from the study:

  • More than 2.1 million people sought emergency treatment in the United States for ladder-related injuries.
  • Of those injuries, almost 10 percent resulted in hospitalization or transfer to another hospital.
  • The most frequently reported injuries were fractures.
  • In cases in which the location where the injury took place was recorded, 97 percent happened at home.
  • In nearly 77 percent of the cases, the injured party was male.

Accidental Fall Statistics

Roofing jobs, of course, require lots of time up and down ladders. Even if you're fortunate enough to avoid a ladder-related injury, a fall from the roof itself can happen.

 

According to the National Health Interview Survey (NHIS) from the Centers for Disease Control and Prevention (CDC):

  • Falls were the leading cause of nonfatal, medically treated injuries in the U.S. every single year from 1997 through 2007.
  • The majority of reported falls occurred in or around the home.
  • Falls were the cause of 38 percent of nonfatal, medically treated injuries in 2007.
  • From 1997 to 2007, 71 percent of fall-related injuries resulted in at least a trip to a doctor's office or clinic.
  • Of that 71 percent, 56 percent were serious enough to necessitate a visit to an emergency room or the use of an emergency vehicle.
  • Between 2004 and 2007, accidental falls accounted for almost 25 percent of all reported fractures.

 

Mortality Rates

The risk of serious injury in a fall increases, of course, as the height off the ground increases. Falls during roofing jobs can be catastrophic, disabling people for life, or even ending lives.

 

Here are some sobering statistics to encourage you to think twice before making that climb to your roof:

 

  • The Home Safety Council says that falls are "by far the leading cause of home injury deaths."
  • Accidental falls killed 20,823 people in 2006, according to the CDC. That's more people than the Miami Heat's American Airlines Arena seats.
  • A 2009 article from the Mayo Clinic listing men's top 10 health threats names falls as one of the leading causes of fatal accidents.

 

Risking injury or death taking on roofing jobs in the hot Florida sun simply isn't worth it. Save time, save your body, save your sanity and make sure the job is done right by putting your trust in a company that has earned the praise of Florida homeowners and business owners with:

  • Top quality products and installation
  • Friendly, professional service
  • Seasoned, certified tradesmen
  • Licensed, bonded, insured
  • Warrantied materials
  • Affordable prices
  • Member of the Better Business Bureau
  • Member of the National Roofing Contractors Association

 

Call Hercules Roofing at 561-955-9889 or email them to arrange your free estimate. For coverage areas and more information about Hercules' unbeatable products and services, click here.

Article Source: http://www.articlesbase.com/diy-articles/ladder-injuries-accidental-fall-statistics-among-reasons-not-to-try-diy-roofing-2244698.html

About the Author

Scaffold Towers Help Work Best for Roof Repairs

Posted on Sep 26, 2010
Author: Matt Browne

We expect a lot out of a roof: most of us go to work simply to 'keep a roof over our head'. Our roofs protect us from rain and keep our houses warm. But if you leave your roof to deal with that all on its own it'll cave in; your roof needs support and a bit of nurturing. A carefully looked after roof will last many years.

Of course, you can get someone else to come in and sort any teeny problems out: a tile at a jaunty angle; a little, niggly leak; a bit of blistering on the garage roof. But there are things you can do on your own from the safety of a hired scaffold tower, without needing a roof ladder.

Clean the Roof

Those black or orange stains streaking across your roof are algae. Get rid of them with a mix of baking soda and water in a garden sprayer: it sorts the stains out a treat. As you're just squirting the mixture on, you can do it all from your aluminium scaffold tower.

To get rid of moss, copper is a marvel. Again call your garden sprayer to action; using powdered copper sulphate mixed with water, squirt it over your roof safely from your scaffol tower. Leave the copper mixture to soak in for about five minutes (no more; in order to protect any metal components); a gentle hose down (not power hose!) will wash the copper off the roof and leave you moss free, and all nails intact.

Clean out the valleys - the bits that join the various parts of the roof - which are often especially good at collecting dust, leaves, debris and twigs. They bear a striking resemblance to an otter dam; not a good look for a house. And pools of water on the roof can easily lead to leaks. Without over-reaching use a long-handled broom to pull the debris off the roof.

Replace tiles

A windy winter or a scorching summer can damage, crack or move tiles. Although it's not the end of the world, lines of perfect tiles can be quite offended by one or two tiles trying to break ranks.

When tiles are within arms' reach of the edge of the scaffold tower, replacement is easy. From up there you can also see if there are larger areas that need help. You need 2 bars, a nail hammer and the replacement tiles - and of course your scaffold tower.

First you need to lift the tiles around the one you need to replace or fix. Use one pry bar to lift the tile to the above right the damaged tile; use the other pry bar to lift the tile to immediate the left. Remove the broken tile when the two neighbouring tiles are lifted: lift the backend of the tile first to slide it out. Simply pop the spanking new tile into its place, making sure it sits properly on the wooden plank fixed to the roof. Done! Don't forget to remove the pry bars when you're finished!

Inspect your roof

Although you can inspect your roof from the ground using binoculars, getting up close and personal using a hired aluminium scaffold tower is going to help you see so much more. You could consider coordinating your own roof inspection with a roofer who could then also make use of the scaffold tower to complete any jobs that need to be done using a lot of know-how.

Look for cracks in the cement around your chimney base; look also at the state of the bricks around the top of the chimney. How does the seal around the base of the chimney look?

If you have asphalt shingles make a note of where the shingles are darker; where they seem to be wearing; and where they are quite clearly working their way loose.

Check in your attic for evidence of leaks and/or damp and try to identify where the leak is coming from externally as well.

Look at the condition of the nails and other metalwork on the roof: does anything need to be replaced?

A little bit of care and attention and your roof really can be "a paradise that's trouble proof" (thanks to Gerry Goffin and Carole King, The Drifters "Up on the Roof" 1962)

Article Source: http://www.articlesbase.com/home-and-family-articles/scaffold-towers-help-work-best-for-roof-repairs-3235473.html

About the Author

Matt Browne shares his knowledge gained in 20 years' working in the construction industry. Working at height in a range of domestic DIY situations is always safer on a secure class-leading scaffold tower. Contact Matt at Lakeside Hire to hire a scaffold tower in your area.

Browns Ladders launches unique range of window cleaning products

Posted on Aug 24, 2010
Author: David Cross

Lancashire-based ladders company, Browns Ladders, has released a range of window cleaning products to go alongside its ladders for window cleaning.

 

The new equipment includes including innovative tool belt systems for the professional cleaner to help carry tools and make the task safer.

 

The selection ranges from squeegees and T-Bars to buckets and scrapers. With innovations such as microscopic fibres, the equipment is designed to make window cleaning more efficient.

 

Ladders for window cleaning are specially designed to be strong and ideally shaped for cleaning windows.

 

Available in both aluminium and timber, the ladders for window cleaning can come in either single or double sections.

 

Barbara Ginley, of Browns Ladders, said: "We are pleased to launch our new equipment to go alongside ladders for window cleaning.

 

"Among the usual window cleaning products are some innovative inventions which will help for both trade and domestic use.

 

"For example, window cleaning has never been easier with lint-free microfibre cloths – designed specifically for glass surfaces – and the special window cleaning gloves have superb gripping power in wet weather."

 

Browns Ladders supplies a wide range of ladders and step ladders to the industrial, trade and domestic markets across the UK.

 

It also provides specialist equipment such as step ladders, wooden loft ladders, extension ladders, roof ladders, multi purpose ladders, telescopic ladders, vehicle access ladders, ladders for window cleaning and surveyor ladders.

 

With ladder inspections and training courses, which Browns Ladders also provide, injuries will be minimised at work.

 

For more information visit http://www.brownsladders.co.uk.

 

Article Source: http://www.articlesbase.com/diy-articles/browns-ladders-launches-unique-range-of-window-cleaning-products-3978529.html

About the Author

Types of ladders and safety measures

Posted on Jul 25, 2010
Author: jackstellon

Ladders also have a variety depending on which part of the house or any building you would use it to and the type of material it is made of. We have the roof, aluminum, timber, sectional, loft, shelf, combination, and rope ladders. Roof ladders are designed with such that will let you do work on your roof without worrying whether your ladder can still hold you. The tip end of the steps are bent in such a way that it will serve as a hook on your roof. Wheels are also attached for easy transportation. Libraries make use of shelf ladders.

They are made of either timber or aluminum; they all have a flat top for holding a couple of books. In addition, wheels are attached so that you can go from to shelf with ease. The height of shelf ladders can also be adjusted so you can reach books from higher sections of the shelf. When it comes to selecting a loft ladder, ladders you can choose either the folding or the sliding type. If you want a multi-purpose ladder, switch to combination ladders. Rope ladders are best for those who are fond of hiking.

Several accessories also come along when you purchase a ladder. For example, a corner standoff is necessary when you need a ladder for climbing trees poles, or stationing at corner places. In such a way, you can finish your work safely. If you are going to work on a gutter and other unsafe places, you need an adjustable ladder standoff. The laddermax standoff serves as your tray when you need to keep your tools for a time when working.

With this, you do not need to go up and down the ladder just to get your tools. The fear the ladder slipping off the floor is one worry that is why many are hesitant of using it. With ladder mats, you do not need to worry about such. These mats are made of rubber so you can be assured that your ladder sticks to the floor. If you are using your ladder for giving services and need to drive elsewhere, a ratchet strap would come in handy. This will hold your ladder while driving.

Safety standards are also given before using a ladder. If you want to make sure that you can finish your job without falling off, make sure that your ladder in good condition. If the last step of the ladder serves as the tray, do not attempt to step on it anymore so you can still have a platform to hold on to. Do not step on the handles as well. Rubbers on the feet of the ladder will also help it not to slip. Wear flat shoes instead of slippers.

Article Source: http://www.articlesbase.com/management-articles/types-of-ladders-and-safety-measures-4653908.html

About the Author

For more details just visit our website ladders

Ladder Types

Posted on Jun 15, 2010
Author: Megan Ellis

A ladder is simply a vertical or inclined set of rungs or steps. There are pictures of ladders on rock paintings which date back to over thousands of years. The original ladder was most probably made of tree trunks. From there the ladders progressed to a steadier wooden ladder and then to a rope ladder and now of course we have ladders made of aluminum and fiberglass.

Aluminum ladders are quite popular in the market place. There are number of reasons for its popularity. Aluminum ladders come in different shapes and sizes. They can be as small as a step stool for around the house. Then you have the step ladders which come in handy for most of the jobs in and around your house and you have the extension ladders which can be raised to different heights. The cost of these ladders varies and is based on its functionality.

Some of the key reasons for the popularity of an aluminum ladder are:

Aluminum is strong.
It’s lightweight.
Its corrosion resistant
Aluminum Ladders are economical
Aluminum ladders are durable.
Aluminum ladders are flame resistant
Aluminum also isn't affected by moisture
Aluminum ladders don’t require protective finish that needs periodic maintenance.

There are different types of ladders, such as:

Fixed Ladder: A ladder that is attached permanently to a structure is called a ‘Fixed Ladder’ – the structure can be a building or a piece of equipment. Usually a fixed ladder (when the length exceeds certain height) will be equipped with cages or rest platforms or ladder landings for safety.

Extension Ladder: An extension ladder allows you to work at more than one height. These ladders have at least two to three different extensions. Most of them have a sliding mechanism for the extensions. Extension ladders are very versatile. The big advantage of extension ladders is that you can extend them and adjust the length according to the job you are doing.

Step Ladder: These ladders are suitable for jobs in and around your house. Step Ladders are shorter and when opened they have a ‘A-shaped’ design. Step Ladders can be easily folded for storage. The steps of these ladders are wider and hence it is much safer and comfortable to use.

Step Platform Ladder: Most of the step ladders come with a platform at the top. This platform is quite handy to rest tools or other materials. A step ladder with a platform at the top is called a ‘Platform Step Ladder’.

Telescopic Ladder: Each level of a telescopic ladder slides down to stack on the level below. This ladder basically collapses on itself and hence is quite compact and portable. Since the ladder collapses on itself like a telescope, it gets the name ‘telescopic ladder’. Most of these telescopic ladders can be extended to different heights thus making it quite versatile. Telescopic ladders are quite handy for work in and around the house.

Roof Ladder: This is basically an extension ladder with some added security built in to let you work on roof. A normal extension ladder might lean against a wall or a tree and hence its ends may be squared off a bit. On the other hand a Roofing Ladder has to extend a few feet past the roof. For additional security, roofing ladders usually have hand grips or special hooks on their top ends.

Article Source: http://www.articlesbase.com/home-improvement-articles/ladder-types-294644.html

About the Author

Megan Ellis runs a website called http://www.HighUpTheLadder.com HighUpTheLadder.com stocks various types of ladders and ladder accessories. All the ladders sold on the website are from leading ladder manufacturers. The site also stocks pool ladders. Visit http://highuptheladder.com/category/step-ladders/ for more information.